HONDA 08A23-9E1-010 - Manual (Page 21)

20
Wireless Headphones
Battery Replacement
• Use a quarter or similar item to
remove the battery cover.
• Place two alkaline AAA batteries into
the battery compartment of the
headphones, making sure the
batteries are properly installed.
• Install the battery cover, use a coin
to tighten it.
Operation
Please read carefully to prevent damage
to the headphones or your ears.
• Be sure the batteries are properly
installed in the headphones.
• Turn the headphone volume nearly
OFF before turning on the power.
Turn on the headphone power
switch, then adjust the headphone
volume to a comfortable level.
Make sure you turn OFF the power
switch before storing the
headphones.
Adjusting Headphones
The headphones may be adjusted to
fit more comfortably. While holding
the top of the headphones, pull down
on each earpiece to make the straps
longer, or push up on each earpiece to
make the straps shorter.