Harbor Freight Tools 93001 - Manual (Page 3)

93001 For technical questions, please call 1-800-444-3353. Page 3
3. Slide the Cutting Blade Frame (2) all the way
down with the sharp edges facing inward.
See Figure 2, below.
4. Push the blade lock down over the Cutting
Blade Frame (2), locking the Frame in place.
5. Place the plastic Push Block (3), with the open
side of Tabs facing down, onto the back end
of the unit so that the tabs on the back of the
Push Block fit through the holes on the end
frame. See Figure 3, below.
6. Turn the Lock Lever on the back of the end
frame, locking the Push Block (3) in place.
See Figure 4, above right.
7. Lift the Handle all the way up and place
a potato, or other soft vegetable, into the
working area of the unit. See Figure 5, below.
WARNING! Keep fingers and hands away from
the cutting area of the unit.
8. Press down on Handle slowly and firmly with
both hands to cut the potato. Remove slices
while Handle is still in the down position.
cleanIng
Remove Cutting Frame (2) and Push Block 1.
(3).
Wash Cutting Frame and Push Block in
2.
dishwasher or by hand using hot water and
detergent.
Wipe off the rest of the Base (1) using a
3.
clean damp cloth with light detergent. Wipe it
dry after cleaning.
Figure 2
1/2” Cutting
Blade
Frame (2)
Figure 3
Push Block
(3)
Figure 4
Push Block
(3)