Hayter Mowers Ranger 53 Pro - Manual (Page 33)

1.33 1.33
FAULT FINDING Continued.
REMEDY PROBLEM POSSIBLE FAULT
Undulating ground contours.
Cutterbar worn.
Cutterbar out of balance.
Wheels damaged.
Grass is wet.
Cut height too low.
Grassbag full.
No airflow through the
grassbag.
Height of cut too low.
Wheels damaged.
Clutch out of adjustment.
Drive belt damaged.
No airflow through the
grassbag.
Discharge chute blocked.
Wet grass.
Grassbag full.
FAULT FINDING
Uneven cut.
Discharge chute blocks.
Mower is hard to push.
Mower will not self propel.
Poor grass collection.
Change direction of travel.
Sharpen the cutterbar.
Balance cutterbar.
Inspect and replace as neces-
sary.
Mow dry grass.
Increase cut height.
Empty grassbag.
Clean the grassbag.
Increase height of cut.
Inspect and lubricate or replace
as necessary.
Adjust clutch lever.
Replace drive belt.
Clean the grassbag.
Remove blockage.
Mow dry grass.
Empty grassbag.