Husqvarna 150BT - Manual (Page 19)

English
19
„ ADJUSTING IDLE SPEED
[130BT]
• The idling speed is set for 3000 rpm at the factory. If it is necessary to adjust the idle
speed, use the adjustment screw on the top side of carburetor.
(1) Idling Adjustment Screw
[150BT] [170BT] [180BT]
• The idling speed is set for 2200 rpm [150BT] or 2000 rpm [170BT/180BT] at the
factory. If it is necessary to adjust the idle speed, use the adjustment screw on the
top side of carburetor.
(1) Idling Adjustment Screw
„ STOPPING ENGINE
• Move the throttle lever to the STOP position.
(4) Stop
NOTE
If the engine does not stop when setting the ignition switch to the stop position,
close the choke lever and stop the engine.
In this case, please repair the machine at your nearest servicing dealer.
(1) Choke Lever
(2) OPEN
(3) CLOSE
(1)
F18
[130BT][150BT]
(1)
F19
[170BT] [180BT]
(1)
(2)
(3)
(4)
F20
(1)
(2)
(4)
(3)
F22
(1)
(2)
(3)
F21
[130BT]
[150BT]
(1)
(2)
(3)
F23
[170BT] [180BT]
Operation