beautypg.com

Important safeguards, Save these instructions – Hamilton Beach Stay or Go 50239 User Manual

Page 2

background image

2

IMPORTANT SAFEGUARDS

1. Read these and all Important Safeguards and instructions

provided with your Blender.

2. Close supervision is necessary when any appliance is

used by or near children.

3. Avoid contacting moving parts.
4. Blades are sharp; handle carefully.
5. Do not use a broken, chipped, or cracked blender jar.
6. Always operate blender with lid in place.
7. Do not use broken, cracked, or loose blades.

8. Never place cutting blades on base without jar properly

attached.

9. Screw on jar nut firmly. Injury can result if moving

blades accidentally become exposed.

10. If jar should turn when motor is turned on, turn off

immediately and tighten jar in threaded jar nut.

11. Do not blend hot foods or liquids in the jars. Pressure

will build up in the jars and hot liquid will spurt out when
opened.

12. Do not store jars with cutting assembly in place. Remove

cutting assembly and wash after each use.

When using your Personal Blending Jar, basic safety precautions should always be followed, including the following:

SAVE THESE INSTRUCTIONS!

OTHER CONSUMER SAFETY INFORMATION

This appliance accessory is intended for household use
only.

Do not place the Personal Blender Jar filled with food or
liquid in the freezer. The contents may freeze and may
result in damage to the cutting blades, jar, blender and
possibly result in personal injury.

When using this appliance accessory, the blender may
draw significantly less power than the maximum rating
marked on the appliance.

TYPE OF BLENDING JAR
PROVIDED WITH YOUR
BLENDER

Plastic Jar

Glass Jar

Either Plastic or Glass

BLENDERS THAT CAN BE USED
WITH STAY OR GO™ PERSONAL
BLENDING JAR

B40, B48

B29, B36, B39, B42, B46, B49

B12, B20, B23, B30, B33, B45

NOTE: This appliance is intended for use with the following
Hamilton Beach blender types. Blender type may be found on
the bottom of your blender.

840168601 ENv05.qxd 1/23/08 8:38 AM Page 2