Hunter Fan PERMALIFE 30793 - Manual (Page 4)

4 ©2010 Hunter Fan Co. 44094-01 20101410
Dust and other irritants are pulled into the air
purification system by the fan. The carbon
pre-filter attracts larger particles like, pet
dander, hair, and odor causing particles
and traps them on the pre-filter. Smaller
particles such as dust, mold, and pollen pass
through the pre-filter and are captured by the
PermaLife
® filter. Up to 99.95% of particles
as small as .5 microns can be captured.
The ionizer charges any remaining particles
causing them to clump together and fall to the
floor or surface where they can be removed
by cleaning. Clean, purified air is then
released into the room through the side grill.
(Figure 2.)
How THe PermALIfe ® sYsTem works
5. Place the bottom of the grill back into the
indention in the base and push the door
back into place.
6. Plug the unit into a 120V electrical outlet.
oPerATIng Your AIr PurIfIer
NOTE: DO NOT run the ionizer if tobacco
smoke, air fresheners, dripless wax candles,
or grease from cooking is present.
PermaLife®
Filter
Pre-Filter
Front
Grill
Ionizer
figure 2.
figure 3.
Pre-Filter
Calendar
Filter
Calendar
Ionizer
Button
On/Off
Speed
Control
Ionizer
Light
On/Off
Light
Ring
On/Speed Control: Rotate the Speed
Control knob to set the desired speed.
Unit off
Low speed - Recommended for
use when soft background noise
is unwanted.
Medium speed - Typical usage setting.
Soft background noise is not an issue.
High speed - Use when quick, efficient
results to a room’s air quality are
desired.
The fan speed can be adjusted at any time.
While the unit is running, the light ring will
glow to indicate the unit is on.
Press the Ionizer button to turn on the Ionizer
function of your air purifier. The Ionizer light
will illuminate while the ionizer is active.