HALO Innovations L900 - Manual

315
TRACK
LIGHTING
Raceway
COOPER LIGHTING
HALO ®
L 9 0 0 O u t l e t B o x C o v e r
Can be used at any electrical feed connection
point (Live, Straight, L, T or X). Size: 5” sq.
Screws included.
Finishes: White (P), Black (MB)
L 9 1 3 S t r a i g h t C o n n e c t o r
To connect two track sections end-to-end. May
be used as feed point.
Finishes: White (P), Black (MB)
L 9 1 4 L L C o n n e c t o r
To connect two track sections at left-hand
90° angle. Outside ground. May be used as feed
point.
Finishes: White (P), Black (MB)
L 9 1 5 L T C o n n e c t o r
To connect three track sections into a left-hand T
configuration. Grounds matched to L915R for
grid system. May be used as feed point.
Finishes: White (P), Black (MB)
L 9 8 1 C o n d u i t A d a p t e r
Designed to accept standard 1/2” trade size
conduit fitting (not supplied). Use when feeding
to surface mount Raceway trac through surface
conduit system.
Finishes: White (P), Black (MB)
L 9 9 4 4 5 ° P e n d a n t A d a p t e r
For installing pendant mounted Power-Trac on
sloped ceiling. For use with L992 and L993.
Finishes: White (P), Black (MB)
L 9 1 1 L i v e E n d C o n n e c t o r
To start a run.
Finishes: White (P), Black (MB)
L 9 1 4 R L C o n n e c t o r
To connect two track sections at a right-hand
90° angle. Inside ground. May be used as
feed point.
Finishes: White (P), Black (MB)
L 9 1 5 R T C o n n e c t o r
To connect three track sections into a right-hand
T configuration. Grounds matched to L915L for
grid system. May be used as feed point.
Finishes: White (P), Black (MB)
L 9 1 6 X C o n n e c t o r
To connect four track sections into a cross
configuration. May be used as feed point.
Finishes: White (P), Black (MB)
L 9 8 4 T- B a r A t t a c h m e n t C l i p
Allows surface mount Raceway Trac to be
attached to inverted tee ceiling. Order as follows:
2 kits for 2’ Trac; 2 kits for 4’ Trac; 3 kits for 8’ Trac
and 4 kits for 12’ Trac.
L 9 9 3 P e n d a n t K i t A s s e m b l y
To suspend track from ceiling. Order as follows: 2
kits for 2’ Trac; 2 kits for 4’ Trac; 3 kits for 8’ Trac;
and 4 kits for 12’ Trac. Includes one 18” threaded
steel stem, canopy and mounting hardware.
Finishes: White (P), Black (MB)
L 4 8 4 8 ” S t e e l S t e m
L993 can be field cut and threaded.
Finishes: White (P), Black (MB)
D E 6 1 1 D e a d E n d
Replacement Dead Ends for Raceway Track (6
included)
Finishes: White (P), Black (MB)