Humminbird 531906-1EN_A - Manual (Page 25)

Select Temperature Sources for Digital Readout Boxes
1. Open the Network Source Setup dialog box.
2. Select the tab for T1, T2, T3, or T4: Press the RIGHT or LEFT Cursor
keys. Each tab represents a digital readout position on the screen.
NOTE: The temperature readout positions may vary with the Humminbird® model. See
the Views section and Select Readouts section of your Humminbird® Operations Manual
for more information.
3. Scroll: Press the DOWN or UP Cursor keys. The selected source is
highlighted in white.
4. Select: Press the RIGHT Cursor key. The check mark indicates that the
source is being used by the control head.
5. Repeat steps 2 - 4 to select a different temperature tab.
Temperature Digital Readouts
1100 Series™
The Temperature Digital Readout positions correspond
with the T1, T2, T3, and T4 tabs in the Network Source
Setup dialog box.
19 Temperature Sources