Mulching kit contents, Mulching kit installation – HONDA H2000 User Manual
Page 6
1.
DEALER INSTALLATION INSTRUCTIONS
MULCHING KIT CONTENTS
Mulching Kit Installation
Mulching Blades
Swirl Guide A
Swirl Guide B
Cover Plate
Ring Pin
8
x
15
m m
Carriage
Bolt
(1)
8
x
22
Flange
Bolt
(1)
8
mm Locking
Flange
Nuts
(2)
The mower deck must be removed from
the lawn tractor to install the mulching kit.
Refer to deck removal and installation
instructions in the owner’s manual or shop
manual.
Installation requires drilling an additional
bolt hole. For your safety, wear eye
protection when operating power tools.
1. Remove the blade, blade holder, and
the protector plate (and lower chute
if
equipped with grass-bagging kit). Use
a wooden block
to
prevent the blades
from
when removing the bolts.
Do
not remove the discharge chute.
BLADE WASHER
(2)
deck
BLADE BOLT
(2)
2.
Clean and inspect the mower deck.
The deck must be free of dents and
deformities for the mulching kit to fit
properly. Clean out all old grass if
installing on a used deck.
2