Mounting the z1-9, Assembly – Husqvarna Z1-9 Collection System 968999196 User Manual

Page 8

Mounting the Z1-9

NOTE: This portion of the assembly

requires lifting the Z1-9;
two people are required.

Hitch

Bracket

Wire Lock

Pin

Upper
Frame

Lower
Frame

Tools Required:

1. 9/16" wrench
2. Ratchet
3. 9/16" socket

1. Install the Hitch from the Custom Kit accord-

ing to the instruction sheet included in that
carton.

2. Slide the Z1-9 into the hitch.
3. Line up holes in the Hitch and Z1-9 and

secure with two (2) 3/8” wire lock pins.

4. Position the Hitch Brackets so that they are

aligned with the holes on the top plate of the
Hitch and the holes in the forward cross bar
of the Lower Frame.

5. Secure with four (4) 3/8” x 1-1/4” hex bolts,

four (4) 3/8” nylon lock nuts, and eight (8)
3/8” flat washers.

ASSEMBLY