HONDA EB6500X - Manual (Page 67)

65
Wheel Kit Installation
TORQUE:
AXLE
8 mm FLANGE NUT (4)
8 16 mm FLANGE BOLT (4)
GENERATOR
SIDE
8 16 mm FLANGE BOLT (4)
STAND (2)
LONGER
20 mm WASHER (2)
4.0 30 mm
COTTER PIN (2)
WHEEL (2)
Install the axle assembly on the generator using four 8 16 mm
flange bolts and 8 mm flange nuts.
Install the two stands on the under frame using four 8 16 mm
flange bolts.
17 22 lbf·ft (24 29 N·m , 2.4 3.0 kgf·m)
Apply grease to the axle shaft as shown below, and install the two
wheels on the axle shaft using the washers and split pins. 1.
2.
3.
09/02/25 16:55:50 31Z22600_066