HoMedics Automatic Blood Pressure Monitor BPA-201 User Manual

Page 11

Pulse

1. Press the

User Select Button to choose User 1

or User 2.

2. With the cuff wrapped around your arm, press the

START/

STOP button. Do not inflate the cuff unless it is wrapped
around your arm. All digits will light up to check the display
functions. The checking procedure will be completed after
about 3 seconds.

3. After all symbols disappear, the display will show

“00”. The monitor is

“Ready to Measure” and will

automatically inflate the cuff to start measurement.

4. The cuff will begin deflating as measurement continues.

Note: This monitor will re-inflate automatically if the

system detects that your body requires more pressure for
measurement.

5. When the measurement is completed,

the cuff will deflate entirely. Systolic
pressure, diastolic pressure and pulse
will be shown simultaneously on the
LCD screen.

The measurement is then

automatically stored into memory.

Note:

1. This monitor automatically turns off approximately

1 minute

after last operation. You may also press the

START/STOP

button to turn the unit off.

2. To interrupt the measurement, you may press the

START/STOP (recommended), “M,” User-Select

Date & Time Set ( ) buttons. The cuff will deflate

immediately after a buttons is pressed.

Pulse

START

STOP

START

STOP