Hayter Mowers 453 - Manual (Page 12)

DTP-000-001-A
4
4
5
5
7
8
DTP-000-002-A
12
13
DTP-000-003-A
1
2
2
3
4
4
Remove the machine from the packaging and check that the following
items have been supplied correctly. If any items are missing contact,
your local dealer. Main deck, lower and upper handlebars.
1. Handlebar bolt x 2 5. Throttle bolt x 2 9. Spanner x 1*
2. Bush x 4 6. Washer x 4 10. Ties x 2*
3. Nut x 2 7. Spring washer x 2 11. Ties*
4. Washer x 4 8. Nut x 2 12. U Bolt x 2*
13. Handwheel x 2*
*Items 9 - 13 Not Illustrated
Fit the lower handle first, and position the white bushes (2) as shown on
both sides. Place the lower handle between bushes with the kick stop
assembley on the right hand side. Attach the lower handle using the fix-
ings supplied.
Assemble the upper handle align holes and fit U-bolts and hand/wheel.
Attach throttle assembly to the outside of the handlebar as shown and
secure the cable using ties supplied.
1.12
ASSEMBLING THE MOWER
1
2
3 4
5
7
DTP-000-011-A
8
6
Delivery Checklist
Assembling
Step 1 Lower Handlebar
Step 2 Upper Handlebar
Step 3 Throttle Assembly
111-1270 (A) 5/3/07 11:47 am Page 1.12