Hayter Mowers M30 - Manual (Page 10)

GB
10 F-050605L
CONTENTS
LIMITED WARRANTY 9
INTERNATIONAL PICTORIALS 10
OWNER’S INFORMATION 11
SAFE OPERATION PRACTICES 11
ASSEMBLY 12
OPERATION 13
MAINTENANCE 15
TROUBLE SHOOTING CHART 18
INTERNATIONAL PICTORIALS
IMPORTANT: The following pictorials are lo-
cated on your unit or on literature supplied
with the product. Before you operate the
unit, learn and understand the purpose for
each pictorial.
NOTE: Illustrations and pictorials begin
on page 2.
Safety Warning Pictorials (Figure 29)
1 WARNING
2 IMPORTANT: Read Owner’s Manual
Before Operating This Machine.
3 WARNING: Thrown Objects. Keep
Bystanders Away. Read User Instructions
Before Operating This Machine.
4 WARNING: Do Not Use This Machine On
Slopes Greater Than 10 Degrees.
5 DANGER: Keep People, Especially
Children, Away From Unit.
6 DANGER: No Step.
7 DANGER: Keep Feet And Hands Away
From Rotating Blade.
8 Declared airborne sound power level of 100
dB(A) is in accordance with Directive
2000/14/EC.
9 DANGER: Disconnect Spark Plug Wire
Before Servicing Unit.
10 WARNING: Hot Surface.
11 WARNING: Use Caution When Connecting
Or Disconnecting Accessories.
12 WARNING: Crushed Fingers.
13 IMPORTANT: Follow Instructions In
Owner’s Manual To Level The Deck.
14 WARNING: Stay Clear Of Mower Blade As
Long As Engine Is Running.
Control And Operating Pictorials
(Figure 30)
1 Engine Start
2 Lights
3 Engine Run
4 Engine Stop
5 Engine Run
6 Brake
7 Parking Brake
8 Clutch
9 Slow
10 Fast
11 Choke
12 Oil
13 Blade Rotation Control
14 Raise
15 Fuel
Declared vibration emission values in accordance with Directive 98/37/EC.
Vibration Emission according to BS EN 1032: Seat 3,16 m/s 2 ,
Right Running Board 2,07 m/s 2 , Left Running Board 1,68 m/s 2
Vibration Emission according to BS EN 1033: Steering Wheel 4,18 m/s 2
Values determined with operator in operating position when the machine was
operated stationary on a concrete surface at 2850 min-1.
Declared airborne noise emissions in accordance with Directive 2000/14/EC,
Annex VIII.
Sound Pressure Level at operator position 86 dB.
Values determined at ear according to the specifications of EN ISO 11201.
MADE IN USA BY MURRAY INC.,
LAWRENCEBURG, TENNESSEE
2850
150