Hawking Technology H2BR4 - Manual (Page 60)

Add PC
Description
The descript Parameters
Client PC Description ion for this client PC rule.
Address
c IP address for the
Access Control rule to work properly.
ecking the
services you want to block.
rotocol This allows you to select UDP, TCP or both protocol types you want to block.
ort Range You can assign up to five port ranges. The router will block clients from
accessing Internet services that use these ports.
pply Changes Click “Apply Changes” to save the settings.
eset Click “Reset” to clear all fields.
Client PC IP
Enter the IP address that you wish to apply the Access Control rule to. This is the
user’s IP address for which you wish to setup an Access Control rule.
Note: You need to give your LAN PC clients a fixed/stati
Client PC Service
You can block the clients from accessing some Internet services by ch
P
P
A
R
Click Apply Changes at the bottom of the screen to save the above configurations. You can now configure other
dvanced sections or start using the router (with the advanced settings in place). a
60