Harbor Freight Tools 93532 - Manual (Page 7)

SKU 93532 For technical questions, please call 1-800-444-3353. Page 7
uNpACKING
When unpacking, check to make sure all the parts shown on the parts List on page 8
are included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
ASSEmBLY ANd OpERATING INSTRuCTIONS
NOTE: For additional information regarding the parts listed in the following pages, refer
to the Assembly diagram on page 9.
Warning! Always make sure the Power Cord of the Fan is unplugged from its electrical
outlet prior to making any adjustments to the fan.
Warning! To reduce the risk of fire or electric shock, do not use this fan with any solid-
state speed control device.
ASSEmBLY
Attach the two Wheels (10) to the Drum (3) using three Bolts (11) per Wheel. 1.
Assemble the Base (12) to the Drum (3) using the four Bolts (11). 2.
Inspect the fully assembled fan with it resting on its wheels and the base. 3.
ImpORTANT: The pads at the bottom of the Base Must sit flat on the floor.
If they do not, remove the Base (12), turn it 180°, and reinstall it.
OpERATION
Situate the Fan in a dry location out of children’s reach and away from normal 1.
room traffic.
Plug in the Power Cord (8).
2.
Set the Control (7) to either LOW or HIGH, depending on your preference. 3.
When finished, set the Control (7) to OFF. 4.