haier HL15B - Manual (Page 26)

Menu Operations
Channel Menu Options Continued
5. FINE TUNE :
6. TUNER : Press VOL+/VOL- button to select AIR (VHF and UHF) and CABLE
reception preference.
7. AUTO SCAN :
Note: The AUTO SCAN function will scan the channels on the selected
antenna input. If the TV is connected to cable, please select CABLE under
If the image or sound received is not very good , you can
press CH+/CH- to select FINE TUNE in the menu . Then , press VOL+/VOL-
button to adjust and improve the image quality. Do not use this feature unless
reception is poor.
Auto search and program channels .Press the VOL+ button
to start to search and the following menu will appears on the screen:
Press
or to select YES and MENU to confirm then the
automatic search function operation. All channels now available will be
automatically preset in order .After the search has finished, the first digital
program number will display on the screen. This search automatically adds
only the active channels in your area to the TV's memory. It deletes any
channels on which there is no broadcast or a poor signal.
' TUNER ' sub menu. The TV searches channels in analog first and then
searches channels in digital signal the second time.
CH+/CH- VOL+/VOL-
Lock Menu Options
1. Press the MENU and VOL+/VOL- button until the FUNCTION menu appears
on the screen .
2. Press CH+/CH- button to select LOCK and VOL+ to enter, the following
will display on the screen:
3. Then input the password 0000. It will bring LOCK menu display on the
screen. You will see the following menu on your screen:
PASSWORD
----
AUTO SCAN
NO YES
3.
4. AFC :
SKIP : If you want skip a channel , press VOL+/VOL- to select ON , and this
channel will be skipped next time when you press CH+/CH- . You can press
the digit buttons to select the channel . If you want to restore the channel , select
OFF.
Auto frequency control. Select ON to improve image quality .