General safety, Safe operating rules, Safety label location – HONDA DB5054 User Manual
Page 4
GENERAL SAFETY
recommendations and operating procedures
before using the attachment.
Follow the insturctions
in this publication at all times, and fnsist that those who work with you do likewise.
Failure to do
so could result in personal injury or equipment damage.
SAFE OPERATING RULES
To
avoid injury, keep bystanders, children and pets away from the
area of operation.
Stay clear of the front of the blade and pinch points.
Do not allow anyone to ride on the blade.
Never permit anyone to operate the attachment without proper instruction. Never allow children to
operate this equipment.
Inspect the attachment before operating it. Repair any damage and correct any malfunction
before operation.
Never attempt to make any adjustments to the attachment while the tractor's engine
is running.
Do not use this attachment when visibility
is poor. Under conditions of poor visibility, there is a
greater risk of striking an object or causing injury.
The use of tire chains and counterweights for better traction is advised when
this attachment is
being used for snow removal: use only those recommended by American Honda
Prolonged exposure to loud noise can cause permanent impairment or loss of hearing. Wear
a
suitable protective device such as
an external hearing protector (earmuffs)
or ear plugs to protect
against loud or othenwise objectionable noise.
Use extreme caution when operating on or crossing
a gravel drive, walk or road. Stay alert for the
hidden hazards of traffic.
Do
not attempt to operate on steep slopes. When operating on
a sloping surface, always drive up
and down the face of the slope, never across the face. Exercise extreme caution when changing
direction on a slope.
If
you hit an object, stop the engine immediately, and check the attachment immediately. Damaged
equipment may increase the possibility of injury during operation.
While operating the tractor, always
raise the dozer blade when it is not in use.
Reduce the tractor's ground speed on slippery surfaces.
To
avoid accidentally snagging the dozer blade, use care when backing up.
Stop the tractor's engine whenever you leave the operator's position to make any inspection,
adjustment or repair.
Before leaving the tractor unattended,
always lower the dozer blade, shift the transmission to
neutral, set the parking brake, stop the engine and remove the key from the ignition switch to
prevent children or unauthorized persons from starting the engine.
NOTE:
Replacement safety labels
can be ordered from your dealer.
5