Hotpoint MWH211 - Manual (Page 8)

HOW TO USE CONTROL PANEL
Plug the AC cord of the oven on a wall socket of 230V~50HZ 10/16A.
CLOCK:
Before the first use and after disconnection power, it is better to update the clock
• Push on the button “Clock/Reset” for more than 3 seconds, the clock is on “00:00” e emits a long
sound signal.
• The 2 dots of the display flick, which indicates that you are on the clock.
• Turn the “- Time +” knob to update minutes.
• Push again the “Clock/Reset” button to confirm.
Flickering of the 2 dots indicates that you are on a clock operation mode and not on cooking mode.
10 seconds after the end of cooking time, the display automatically back to clock mode.
8
“Stop/Start” button
Start or stop cooking
Display
Display cooking time and
power level
“Power Level” button
• Select power level
• 5 power level
“Clock/Reset” button
• Set the clock
• Stop cooking and reset
the oven
“- Time +” knob
• Select cooking time
• change power level or
time during cooking
DESCRIPTION OF CONTROLS