beautypg.com

Hayter Mowers M10/30 User Manual

Page 10

background image

GB

10

276816MA

CONTENTS

LIMITED WARRANTY

9

INTERNATIONAL PICTORIALS

10

OWNER’S INFORMATION

11

SAFE OPERATION PRACTICES

11

ASSEMBLY

12

OPERATION

13

MAINTENANCE

15

TROUBLE SHOOTING CHART

18

INTERNATIONAL PICTORIALS

IMPORTANT: The following pictorials are lo-
cated on your unit or on literature supplied
with the product. Before you operate the
unit, learn and understand the purpose for
each pictorial.

NOTE: Illustrations and pictorials begin

on page 2.

Safety Warning Pictorials (Figure 29)

1

WARNING

2

IMPORTANT: Read Owner’s Manual

Before Operating This Machine.

3

WARNING: Thrown Objects. Keep

Bystanders Away. Read User Instructions

Before Operating This Machine.

4

WARNING: Do Not Use This Machine On

Slopes Greater Than 10 Degrees.

5

DANGER: Keep People, Especially

Children, Away From Unit.

6

DANGER: No Step.

7

DANGER: Keep Feet And Hands Away

From Rotating Blade.

8

Declared airborne sound power level of 100

dB(A) is in accordance with Directive

2000/14/EC.

9

DANGER: Disconnect Spark Plug Wire

Before Servicing Unit.

10 WARNING: Hot Surface.
11 WARNING: Use Caution When Connecting

Or Disconnecting Accessories.

12 WARNING: Crushed Fingers.
13 IMPORTANT: Follow Instructions In

Owner’s Manual To Level The Deck.

14 WARNING: Stay Clear Of Mower Blade As

Long As Engine Is Running.

Control And Operating Pictorials

(Figure 30)

1

Engine Start

2

Lights

3

Engine Run

4

Engine Stop

5

Engine Run

6

Brake

7

Parking Brake

8

Clutch

9

Slow

10 Fast

11 Choke

12 Oil

13 Blade Rotation Control

14 Raise

15 Fuel

Declared vibration emission values in accordance with Directive 98/37/EC.

Vibration Emission according to BS EN 1032: Seat 3,16 m/s

2

,

Right Running Board 2,07 m/s

2

, Left Running Board 1,68 m/s

2

Vibration Emission according to BS EN 1033: Steering Wheel 4,18 m/s

2

Values determined with operator in operating position when the machine was

operated stationary on a concrete surface at 2850 min−1.

Declared airborne noise emissions in accordance with Directive 2000/14/EC,
Annex VI.

Sound Pressure Level at operator position

86 dB.

Values determined at ear according to the specifications of EN ISO 11201.

Assembled in USA by Swisher for
Briggs & Stratton Corporation

2850

150

7.8