Instant review, Quick edit – Hitachi VM-H38A User Manual
Page 35
INSTANT REVIEW
35
INSTANT REVIEW
1. In record/pause (stand-by) mode, press "REVIEW" button, and the last few seconds of the
recorded scene is played back in the reverse direction and then played back in the forward
direction.
2. When the tape reaches the end of the scene you have just recorded, the camera/recorder
returns to the record/pause (stand-by) mode.
Recording starts again when the start/stop button is pressed again.
QUICK EDIT
The quick edit feature allows you to search for the end of previously recorded material, or find a
particular spot on your tape, to begin your editing, or recording new material. Quick edit is used
while the camera/recorder is in the record/pause (stand-by) mode. By holding down the
"F.FWD", "REW", or "PLAY" button you can visually search or play your tape. Releasing the
buttons ("F.FWD", "REW", OR "PLAY") immediately stops the tape at that position.