Hitachi BVA-2007 - Manual (Page 20)

19 Storing, recalling, and erasing measurement data
Storing, recalling, and erasing
measurement data
Storing data
After each measurement, the systolic and diastolic rates,
pulse rate and the time & date will be automatically stored.
The memory holds data for the latest 60 measurements in
each of 2 memory zones. If more than 60 measurements are
entered, the memory will automatically clear out the oldest
data.
Recalling data
a.Press the "
" or " " button to select the memory zone.
b.Press the "MEMORY" button to get your stored memory
data. If there is no data in the memory nothing will appear.
*If there is data in the memory, the first reading will
be an average of the last three recorded set of
measurements (systolic and diastolic pressure and
pulse rate).
c.Press the "MEMORY" button again and the latest
recorded set of measurements will appear along
with the recording time and date.
d.Press the " " button to read the next set of
stored data.
The data displayed starts with the most recent reading and
continues backwards to the oldest.