Functional description, Specifications, Name of parts – Hitachi DH 45MR User Manual

Page 9

English

Fig. 1

Front Cap

Housing

Stopper

Grip

Switch Trigger

Side Handle

Handle

Nameplate

Tail Cover

Set Screw
(Under the
Tail Cover)

Selector Lever

Brush Cap
(Inside the Tail Cover)

Dial

SPECIFICATIONS

Motor

Single-Phase, Series Commutator Motor.

Power Source

Single-Phase, 120 V 60 Hz

Current

11.6 A

Capacity

Drill Bit: 1-3/4" (45 mm)
Core Bit: 4-29/32" (125 mm)

No-Load Speed

120 – 240/min

Full-load Blow

1250 – 2500/min

Weight

17.6 lbs (8.0 kg)

FUNCTIONAL DESCRIPTION

NOTE:

The information contained in this Instruction Manual is designed to assist you in the
safe operation and maintenance of the power tool.

NEVER operate, or attempt any maintenance on the tool unless you have first read and
understood all safey instructions contained in this manual.

Some illustrations in this Instruction Manual may show details or attachments that
differ from those on your own power tool.

NAME OF PARTS

Drill Bit

01Eng_DH45MR_US

4/4/06, 10:23