Maintenance and servicing – Harbor Freight Tools CEN-TECH 98982 User Manual

Page 11

Page 11

SKU 98982

For technical questions, please call 1-800-444-3353.

MAInTEnAnCE And

SERVICInG

Procedures not specifically

explained in this manual

must be performed only by a

qualified technician.

TO PREVEnT

SERIOuS InjuRY

FROM ACCIdEnTAL

OPERATIOn:

Turn the Power Switch (15) of

the Scale to its “OFF” position

and unplug the unit’s Power

Cord (17) from its electrical

outlet before performing any

inspection, maintenance, or

cleaning procedures.
TO PREVEnT SERIOuS

InjuRY FROM EQuIPMEnT

FAILuRE:

do not use damaged

equipment. If abnormal noise

or vibration occurs, have the

problem corrected before

further use.

BEFORE EACH USE: Inspect

the general condition of the Scale.

Check for loose screws, misalignment

or binding of moving parts, cracked

or broken parts, Battery leakage, and

any other condition that may affect its

safe operation.
BATTERY REPLACEMENT:

A Bat-

tery that fails to accept a charge is

an indication the Battery should be

replaced. To replace the Battery:

FIGuRE F

BATTERY

(16)

• Unscrew and remove the six

Screws (18) located on the back

panel of the Display (1).

(See Figure F.)
Remove the front portion of the Dis-

•

play (1) to expose the Battery (16).

(See Figure F.)
Remove the old Battery (16) and

•

replace with a new Battery of the

same type. Then, re-attach the

front portion of the Display (1) to

the back portion of the Display and

secure using the six Screws (18).

(See Figure F.)
IMPORTANT: The old Battery (16)

•

must be recycled according to local

solid waste authority instructions.

AFTER USE:

Clean all external

surfaces of the Scale with soft, clean

cloth. Do not use solvents. Do not

immerse the Scale in liquid.

WARnInG! If the Power Cord

(17) is damaged, it must be re-

placed only by a qualified service

technician.