Hamilton Beach 840086200 - Manual (Page 5)

5
Power Boost
Press and hold down the button for
additional power
at any speed.
NOTE: Do not
use Power Burst
for more than
two minutes at
a time or motor
may overheat.
Bowl Rest ™
This feature can be used on most large
mixing bowls.
Use the Bowl
Rest while adding
ingredients or
checking a
recipe. To use,
TURN MIXER
OFF, then set
the mixer on the
edge of the bowl.
CAUTION:
• Never use Bowl Rest when mixer is on.
• Do not use Bowl Rest on small
(1 1 ⁄
2
quart) mixing bowls or plastic
mixing bowls.
Shift and Stir™ Bowl Lever
Use the lever to move the turntable.
This allows you to position the beaters
near the edge of the bowl or in the
center.
Mixing Shield
1. To attach: Place small tabs on the
mixing shield
into grooves on
side of mixer.
Push the
shield back
onto the mixer.
The mixing
shield will snap
into place in
the groove around the mixer.
2. Now insert the beaters or other
attachments and use the mixer
as you normally would.
3. To remove: Turn mixer off and
unplug. Eject beaters or other
attachments.
4. Grasp mixing shield in one hand,
while holding
mixer in other
hand. Pull
shield straight
out, then up,
to remove.
5. Wash mixing shield in hot, soapy
water. Rinse and dry.
Mixer Lockdown Button
Use this feature to lock the mixer in
the “down” position when using on
the stand.
Power
Burst
Using Your Mixer
1. Make sure mixer is unplugged and
speed control is set on OFF. Insert
beaters. Use as hand mixer or
assemble on stand.
2. Plug mixer into electrical outlet.
3. Move the speed control to desired
speed, starting at 1 and increasing
to a higher speed as necessary.
4. If using as a stand mixer do not
leave mixer unattended. Always
monitor the progress of the mixing.
Optional Features
(Available on selected models)