Harbor Freight Tools 02628 CYCLETREE User Manual
Page 2
Page 2
SKU 2628
Specifications
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using the movable bicycle rack, basic safety precautions should al-
ways be followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this movable bicycle rack!
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Observe work area conditions. Do not use Cycletree in damp or wet locations. Don’t
expose to rain. Keep work area well lighted. Situate the Cycletree in a “child safe”
location. Only use the Cycletree on a flat, level, hard surface.
3.
Keep children away. Children must never be allowed in the work area. Do not let
them handle the Cycletree . Do not let children remove or add cycles to the Cycle-
tree.
4.
Store idle equipment. When not in use, Cycletree must be stored in a dry location to
inhibit rust. Always keep Cycletree out of reach of children.
5. Use the right tool for the job. There are certain applications for which this product
was designed. It will do the job better and more safely at the rate for which it was
intended. Do not modify this product and do not use this product for a purpose for
which it was not intended.
6.
Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically non-conductive clothes and non-skid footwear
are recommended when working. Wear restrictive hair covering to contain long hair.
7.
Use eye protection. Always wear ANSI approved impact safety goggles during
assembly.
8.
Do not overreach. Keep proper footing and balance at all times..
9.
Maintain this movable bicycle rack with care. Keep Cycletree clean for better and
safer performance. The handles must be kept clean, dry, and free from oil and grease
at all times.
Overall Dimensions
30” Square Base-Top of “T” Bar is 66” from the Base Beam
Hang Bar Dimensions
36” Height & 17-1/2’ Length per side, 7/8” Diameter
Base Post Dimensions
1-3/16” Sq. x 35-1/8” L x 1/16” Thick
Center Post Dimensions
1” Sq. x 36” L x 1/16” Thick
Casters
7/8” W x 3” Diameter