Replacing the fuse – Harbor Freight Tools CHICAGO ELECTRIC 95799 User Manual
Page 4
Page 4
SKU 95799
for technical questions, please call 1-800-444-3353.
replacing the fuse
Car Adapter with Cord (14)
Spring (16)
Fuse (15) F2A250V
Car Adapter Tip (17)
Car Adapter
Threaded End (18)
Figure 1
Unscrew the Theaded End (18) from the Car Adapter with Cord (14) as shown in
Figure 1.
Pull out the Fuse (15) from the Car Adapter and Cord (14). The Fuse compartment
also includes one Spring (16) and one Car Adapter Tip. These may come out when
removing the Fuse (15).
The Fuse (15) is a F2A250V amp fuse. Do not replace with a different size fuse,
as this may result in excessive heat and explosion, destroying the Spotlight and
resulting in injury.
Insert the Spring (16), and replace the Fuse (15). Set the Car Adapter Tip (17) over
the Fuse and into the Theaded End (18) of the Car Adapter with Cord (14). Screw
Threaded End (18) back onto the Car Adapter.
1.
2.
3.
4.