How the backup sensors work – HONDA 08V67-S3V-2000-81 User Manual
Page 5
© 2002 American Honda Motor Co., Inc. - All Rights Reserved.
5
Within
1 foot
Continuous
beep
About 1.5 – 2 feet
Intermittent beeps
About
1 – 1.5 feet
Quick
intermittent
beeps
2 feet
Continuous
beep
About
2 – 4 feet
Quick
intermittent
beeps
About 4 – 6 feet
Intermittent beeps
CORNER
SENSOR
CENTER
SENSOR
CORNER
SENSOR
How the Backup Sensors Work
Backup Sensors
The sensors are ready for operation when the shift
lever is moved to the reverse position with the
backup sensor switch turned ON.
Operation of the sensors is dependent upon the
ultrasonic waves they emit. They calculate the
distance between the sensor and a rear obstacle by
measuring the time until the ultrasonic waves reach
the sensor after being reflected by the obstacle.
The sensors are designed to give you an audible
signal when the rear bumper of your vehicle is
approaching an obstacle.
•
The audible signal has three sounds:
Sound
(Tone Quality)
Slow intermittent
beeps
Quick intermittent
beeps
Continuous beep
Corner Sensors
(High)
Within 2 feet
Within 1.5 feet
Within 1 foot
Center Sensors
(Low)
Within 6 feet
Within 4 feet
Within 2 feet