Warning, Maintenance and servicing, Please read the following carefully – Harbor Freight Tools CENTRAL MACHINERY 97385 User Manual
Page 6
Page 6
SKU 97385
For technical questions, please call 1-800-444-3353.
the “C” Clamp (9). Slide the End
Slide (6) to the right or left along the
Fence Slides (5) to the point at which
you need to stop your material. Then
retighten the Knob (11) to secure the
End Slide (6) in place.
(See Assy. diagram.)
NOTE:
4.
The End Slide (6) may be in-
serted in either the left or right side of
the Fence Slides (5) depending upon
the application.
(See Assy. diagram.)
MAiNTENANCE ANd
SERViCiNg
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
TO pREVENT
SERiOUS iNjURY
FROM ACCidENTAL
OpERATiON:
Turn the power Switch of the
router or drill press to its
“OFF” position and unplug
the machine from its electrical
outlet before performing any
inspection, maintenance, or
cleaning procedures.
TO pREVENT SERiOUS
iNjURY FROM EQUipMENT
FAiLURE:
do not use damaged
equipment. if abnormal noise
or vibration occurs, have the
problem corrected before
further use.
inspection, Maintenance And Cleaning
BEFORE EACH USE,
1.
inspect the
general condition of the Router Table
Fence. Check for loose screws, mis-
alignment or binding of moving parts,
cracked or broken parts, damaged
and any other condition that may af-
fect its safe operation.
AFTER USE,
2.
clean external surfaces
of the Router Table Fence with a
clean, moist cloth and mild detergent.
Then dry. Do not use solvents.
WHEN STORiNg,
3.
keep the Router
Table Fence in a clean, dry, safe loca-
tion out of reach of children and other
unauthorized people.
pLEASE REAd THE
FOLLOWiNg CAREFULLY
THE MANUFACTURER AND/OR
DISTRIBUTOR HAS PROVIDED THE
pArtS LiSt And ASSembLy diAgrAm in
tHiS mAnuAL AS A reFerenCe tooL
onLy. neitHer tHe mAnuFACturer
OR DISTRIBUTOR MAKES ANY
REPRESENTATION OR WARRANTY OF
ANY KIND TO THE BUYER THAT HE
or SHe iS quALiFied to mAKe Any
REPAIRS TO THE PRODUCT, OR THAT HE
or SHe iS quALiFied to repLACe Any
PARTS OF THE PRODUCT. IN FACT, THE
MANUFACTURER AND/OR DISTRIBUTOR
expreSSLy StAteS tHAt ALL repAirS
And pArtS repLACementS SHouLd
BE UNDERTAKEN BY CERTIFIED AND
LiCenSed teCHniCiAnS, And not by
tHe buyer. tHe buyer ASSumeS ALL
riSK And LiAbiLity AriSing out oF
HiS or Her repAirS to tHe originAL
produCt or repLACement pArtS
THERETO, OR ARISING OUT OF HIS OR
Her inStALLAtion oF repLACement
PARTS THERETO.
WARNiNg