Harbor Freight Tools 41711 User Manual
Page 3
SAFETY WARNINg & CAUTIONS
READ ALL INSTRUCTIONS BEFORE USINg THIS TOOL!
KEEp WORK AREA CLEAN.
1.
Cluttered areas invite injuries.
OBSERVE WORK AREA CONDITIONS.
2.
Do not use tools in damp, wet, or poorly lit locations. Do not
expose to rain. Keep work area well lit. Do not use electrically powered equipment in the presence of
flammable gases or liquids.
KEEp CHILDREN AWAY.
3.
Children must never be allowed in the work area. Do not let them handle
machines, tools, or equipment.
STORE IDLE EQUIpMENT.
4.
When not in use, tools must be locked up in a dry location to inhibit rust.
Always lock up tools and keep out of reach of children.
DO NOT FORCE THE TOOL.
5.
It will do the job better and more safely at the rate for which it was
intended. Do not use inappropriate attachments in an attempt to exceed the tool’s capacities.
USE THE RIgHT TOOL FOR THE JOB.
6.
Do not use a tool for a purpose for which it was not intended.
DRESS pROpERLY.
7.
Do not wear loose clothing or jewelry, as they can be caught in moving parts.
Non-skid footwear is recommended. Wear restrictive hair covering to contain long hair. Always wear
appropriate work clothing.
USE EYE, EAR
8.
AND BREATHINg pROTECTION. Always wear ANSI approved impact safety goggles
if you are producing metal filings or wood chips. Wear an ANSI approved dust mask or respirator when
working around metal, wood, and chemical dusts and mists. Use ANSI approved ear protection when
working in a loud or noisy environment.
DO NOT OVERREACH.
9.
Keep proper footing and balance at all times. Do not reach over or across
running machines.
MAINTAIN TOOLS WITH CARE.
10.
Keep tools sharp and clean for better and safer performance. Follow
instructions for lubricating and changing accessories. Control handles must be kept clean, dry, and
free from oil and grease at all times.
Page 3 SKU # 41711
WARNINg: When using shop equipment, basic safety precautions should always be followed to reduce the
risk of personal injury and hazards.