Assembly – Harbor Freight Tools 92966 User Manual
Page 5
Page 5
SKU 92966
for technical questions, please call 1-800-444-3353.
Sewing Machine
Motor
Power Switch
Knee Lifting Arm
for Presser Foot
Table Stand and
Top (not provided)
Assembly
The assembly instructions describe mounting the Single-Needle Sewing Machine (Model
92966) to the Table Stand (Model 03929), not included. In order to complete this procedure,
you must first purchase and assemble the Table Stand Kit (Model 03929).
1.
Locate four corner rests in the rectangular hole of the Table Stand where the machine
will sit.
2.
Place two rubber seats (A) on the operator-side and secure with supplied hardware (C).
See figure 1.
3.
Place two rubber hinge rests (B) on the hinge-side and secure with supplied hardware
(C).
4.
Seat the Oil Pan (D) on the corner seats (A). See figure 2.
5.
Insert Hinges (E) into the machine bed. See figure 3.
6.
Fit the machine head’s hinges to the rubber hinge rests (B) before placing the machine
head on the corner seats. See figure 4.