haier TFT-LCD TELEVISION L32K3 - Manual (Page 15)

Basic Receiving and Playing Operations
TFT -LCD television Owner’s Manual 15
Exchange
Press A MENU on the remote control unit or MENU on
the TV’s front panel to display main menu, and then
press 3 /  to select Tuning menu.
Press B
5
/
6
to select the Prog. Exchange option,
and then press OK to enter its submenu.
Press
C
5
/
6
to select the To Channel option, and
then press 3 /  to set the found to be exchanged to.
menu
Current Channel
To Channe
Exchange
Prog. Exchange
10
20
OK
Tuning Sound
After adjusting the current channel and the found to D
be exchanged to, press
5
/
6
to move the cursor
to the Exchange option, and then press OK to start
exchange and exchange the program on current
channel to the channel you set for exchange.
Watching TV Program
You can watch TV program in a presetting channel.
How to select the desired program
Using Program number buttons A
Directly enter the channel number with the numeric
keypad on the remote control. If to select channel
numbers of double-digital or three-figure, press
continuously the numeric buttons in three second.
Using B CH ∧ /CH ∨ buttons
Press CH+ to select a channel number in number
increasing direction. Press CH ∨ to select a channel
number in number decreasing direction.
How to select the desired sound
Press VOL-/+ buttons on the remote or the front of
the TV set to adjust the volume level. The range is
0~100. When the volume buttons are pressed the
volume level is displayed automatically on the TV
screen.
Mute Setting
Press A MUTE button on the remote control and a icon
will display on the screen. At this time, the sound of
the TV set is turned off.
If you want to recover the sound, press B MUTE
button again or directly press VOL+ button.
Quick program view
Suppose that you previously watched a TV program A
on Channel 8, but now you are watching a TV
program on Channel 18 (as shown in the below
figure).
If you want to return to Channel 8, just press B
"RECALL (Flashback)" once.
If you want to return to Channel 18 again, just press C
"RECALL (Flashback)" once again.
Note
This function is only available in TV mode. R
Picture Control Functions
This means the adjustment of specific contents in the
picture, if already in normal condition, it is not necessary
to make any adjustment.
Due to different TV signal inputs, some items may need
to be adjusted. The following makes a description by
only taking TV signal as an example.