haier HPIM26W User Manual

Page 9

Operating Instructions

1. Open the top cover, take out the ice storage basket and fill the water reservoir

with drinkable (tap, purified or bottled) 0.8 gallons water to the level mark

and replace the ice storage basket.

Make sure that the water level does not reach above the level mark or the

bottom of the ice storage basket. Close the top cover.

Note: During the operation process, if the level of water in the water reservoir

becomes too low, the machine will automatically stop operating and the

"Add Water"

indicator will display on the LED.

2. Plug the unit into a grounded outlet. Push the ON / OFF button on the control

panel to turn on the machine.

3. Select the desired size of ice cube by pressing the S, M, or L ice selector

button.

S = Small ice cubes (Approx. 6 minutes)
M = Medium ice cubes (Approx. 9 minutes)
L = Large ice cubes (Approx. 12 minutes)
The icemaker will start making ice soon after. The next cycle of 12 ice cubes

is complete (based on water temperature, ambient room temperature and

selected ice cube size).

Note: To stop the operation, press the ON/OFF button.

English

Lift ice basket to add water

This manual is related to the following products:

HPIM26S