Electronic timer – Hotpoint 50cm Free Standing Electric Cooker EW36G User Manual

Page 25

2 5

Electronic timer

This function displays the time and works as a timer which counts down to zero.
Note: All functions will be implemented approximately 7 seconds after they have been set.

Resetting
the clock

After the appliance has been connected to the power supply, or after a power cut, the clock
display will begin to blink, showing the figure: 0:00

•

Press button

and then buttons

and

to set the exact time. Press and hold the

buttons to quicken the count upwards.
Any necessary modifications can be made by repeating the above process.

Minute Minder
feature

This function may be accessed by pressing the

button, after which the display will show

the symbol

. Every time the

button is pressed it corresponds to a time increase of 10

seconds, until it reaches 99 minutes and 50 seconds. After this point, each press of the
button represents an increase of one minute, up to a maximum of 10 hours.

Pressing the

button reduces the time.

After the time period has been set, the timer will begin to count down. When the timer
reaches zero, the buzzer will sound (this may be stopped by pressin

g any button).

The time may be displayed by pressing the

button, and the

symbol indicates that the

timer function has been set. After approximately 7 seconds, the display will automatically
revert to the timer.

Cancelling a
time that has
already been set

Press the

button until the display shows 0:00.

Adjusting the
buzzer volume

After selecting and confirming the clock settings, use the

button to adjust the volume of the alarm

buzzer.