Hitachi 51UWX20B - Manual (Page 51)

SETUP
51
Select ANTENNA if you are using an indoor or outdoor antenna. Select Cable if you have cable TV.
Use CURSOR ̇ , ̈ to highlight the correct signal mode.
Press the SELECT button to select highlighted signal.
Press EXIT to quit MENU or select ANT A to return to previous menu.
Reception channels for each mode are shown at the left.
Refer to your cable or TV guide for channel identification standards.
Set The Channels
Set The Channels
Set The Clock
Menu Preference
Setup
Set The Inputs
Move SEL Select
Set Event Timer
Set Closed Captions
Setup
Move SEL Return
Set The Channels
Ant A
Ant B
Setup
Move SEL Select
Set The Channels
Setup
Move SEL Return
Set The Channels
Ant A
Source
Antenna
Cable(1) Cable(2)
Auto Channel Scan Start
Setup
Move SEL Select
Set The Channels
Ant A
Source
Antenna
Cable(1) Cable(2)
Auto Channel Scan Start
Ant A
Ant B
About Your TV
CURSOR
CURSOR
CURSOR
CURSOR
RECEPTION BAND
CATV 1 OR CATV 2
AIR
VHF 2 ~ 13ch
UHF 14 ~ 69ch
CATV CHANNEL
VHF 2~13
Mid band A~1
A-5 ~ A-1
Super band J~W
Hyper band
W + 1 ~ W + 28
Ultraband
W + 29 ~ W + 84
Indicated on
the screen
2 ~ 13
14 ~ 22
95 ~ 99
23 ~ 36
37 ~ 64
65 ~ 125
NOTE: If certain CATV channel’s picture are poor or unable to be viewed in Cable (1) mode, select Cable (2).