Harbor Freight Tools 41213 - Manual (Page 2)

Specifications
Voltage & Watts 110 volts, 850 watts, 60Hz, Single Phase
Amps 6 amps / no load 2.0 / with load 2.5 / start up 3.6
RPM 2 Speeds (2800 / 3300)
Arbor diameter 7/8”
Spindle thread 5/8” – 11
Wheel diameter 6 – 3 / 4”
Warning!!!
Read all instructions before charging or operating the tool.
Save This Manual.
You will need it for safety guidelines, operating instructions, and parts
list. Keep your invoice with this manual and record your invoice number here
_________________________ for future reference.
Rules For Safe Operation
Work Area
1. Keep Work Area Clean. Cluttered areas invite accidents.
2. Consider Work Environment. Do not use power tools in damp or wet locations. Do not
expose to rain. Do not use tools in presence of flammable liquids or gases.
3. Keep Children Away. All children should be kept away from work area. Do not let them
handle tools or electrical cords.
4.
Store Idle Equipment. When not in use store tools in a high, dry, locked location.
Personal Safety
5. Dress Properly. Do not wear loose clothing or jewelry that can be caught in moving parts and
cause personal injury. Wear protective hair covering to protect long hair. Rubber gloves and non skid
footwear are recommended when working outdoors.
6. Protect Your Eyes, Ears, and Lungs. Wear safety glasses. Wear a dust mask. Use a full
face mask if you are producing metal filings or wood chips. Wear hearing protection during ex-
tended periods of operation. Safety equipment is available at Harbor Freight Tools.
7. Stay Alert. Concentrate on what you are doing. Use common sense. Do not operate while
under the influence of drugs or alcohol. Read warning labels on prescription medication to determine
if the medication will impair your judgment or reflexes.
#41213 2