Hawking Technology HWUR54G - Manual (Page 18)

Parameter Description
Original SSID You must enter the SSID of the wireless access point that you wish to
repeater.
SSID of Extender
This is the name of the new extended wireless network. All computers
that connect through the Range Extender must use this SSID.
Mode
802.11b mode: allows for data transfer rates up to 11Mbps
802.11g mode: allows for data transfer rates up to 54Mbps
Mixed mode: provides the best performance for 11g transmission when
multiple standards/client cards are present in the network.
Broadcast SSID The wireless ID of the Range Extender can be hidden from all wireless
computers searching for local wireless networks.
Enabling this will make the network ID public. Disabling will hide this
information from public users.
Channel
Select the appropriate channel from the list provided to correspond with
your network settings. Your channel number MUST match the channel of
the original Access Point that you are extending.
Security
Disable: Disable the security function.
WEP: WEP is an authentication algorithm, which protects authorized
Wireless LAN users against eavesdropping. The Authentication type and
WEP key of wireless stations must be the same with the Access Point.
This Access Point supports 64/128-bit WEP Encryption function. With this
function, your data will be transmitted over the wireless network securely.
# You can refer to the detail setting from chapter 3.2.6.
Advanced setting
It provides more powerful features for specific configurations of the
Range Extender.
Access Filter The Range Extender allows you to provide a Filter List of MAC addresses
that are allowed to associate with the Range Extender.
Click Apply button at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the Access Point.
18