Harbor Freight Tools 92390 - Manual (Page 4)

SKU 92390 For technical questions, please call 1-800-444-3353 PAGE 4
SERVICE
1. Appliance service must be performed only by qualified repair personnel.
Service or maintenance performed by unqualified personnel could result in a risk
of injury.
2. When servicing a kitchen appliance, use only identical replacement parts.
Follow instructions in the
“Inspection, Maintenance, And Cleaning” sec
tion of this manual. Use of unauthorized parts or failure to follow maintenance
instructions may create a risk of personal injury.
SPECIFIC SAFETY RULES
1. Maintain a safe working environment. Keep the work area well lit. Make sure
there is adequate surrounding workspace. Always keep the work area free of
obstructions, grease, cooking oil, trash, and other debris. Do not use the Meat
Mixer in areas near flammable chemicals, dusts, and vapors.
2. Maintain labels and nameplates on this product. These carry important infor-
mation. If unreadable or missing, contact Harbor Freight Tools for a replacement.
3. When not in use, keep the Meat Mixer dry and clean.
4. Never use the Meat Mixer if it appears damaged.
5. WARNING! To avoid health hazards: Before assembling and using, and
after using this product, immerse all parts of the Meat Mixer in warm, clean water
and thoroughly wash with an anti-bacterial detergent. Always wash hands thor-
oughly with warm, clean water and anti-bacterial soap before and after working
with meat and poultry products. Failure to follow these precautions may
result in serious illness due to food poisoning.
6. WARNING! To avoid serious injury to fingers and hands: Always keep
the clear Plastic Cover (6) firmly in place on the Meat Mixer
prior to turning the
Handle (2). While mixing, insert food products only through the slot in the clear
Plastic Cover.
7. WARNING! The warnings, precautions, and instructions discussed in this
manual cannot cover all possible conditions and situations that may occur. The
operator must understand that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS