Hotpoint SY37W - Manual (Page 6)

6
GB
The electronic
cooking programmer
This feature allows you to program the oven or the grill as
follows:
• delayed cooking time for a specified period;
• immediate start for a specified period;
• timer.
Button Functions:
H : Timer with hours and minutes;
$ : cooking time;
% : end cooking time;
: Manual change;
) : set cooking time (to count down);
* : set cooking time (to start from zero)
How to reset the digital clock
After the appliance has been connected to the power
supply, or after a power cut, the clock display will
automatically reset to 0:00 and begin to blink.
• Press the $ and % buttons simultaneously, release,
and then set the exact time (within 4 seconds) using
the ) and * buttons.
The button * advances the hours.
The button ) decreases the hours.
The time can also be changed in the following two ways:
1. Repeat all of the steps above.
2. Press the button, release, and then use the ) and *
buttons to update the time.
Manual operation of the oven
Once the time has been set, the programmer automatically
switches to manual mode.
Note: Press the ( button to restore the manual mode after
every “Automatic” cooking session.
Adjusting the volume of the buzzer
After selecting and confirming the clock settings, use the
) button to adjust the volume of the alarm buzzer.
Delayed cooking time for a specified period
The total cooking time as well as the time at which the cooking
will finish must be set. If we assume that the time display
reads10:00:
1. Turn the oven control knob to the setting and temperature
desired (example: static oven mode at 200°C).
2. Press the button $ button, release, and then set the
desired cooking duration (within four seconds) using the
and * buttons. Supposing the cooking duration is set
at 30 minutes, the display will read as follows:
+
Once the setting process is complete, after 4 seconds the
current time will reappear, along with the m symbol and the text
“auto”
3. Press the button % button, release, and then use the
and * buttons to set the desired cooking end time. Let
us suppose this time is 1:00 p.m. =
4. Once the setting process is complete, after
approximately 4 seconds the current time will be
displayed:
?
When “auto” is on, it indicates that the length of cooking
time and the time it is due to finish have been
programmed in automatic mode. At this point, the oven
will turn on automatically at 12:30 and turn off after 30
minutes. When the oven is turned on, the symbol m will be
displayed for the entire cooking time. The cooking
duration can be displayed at any time by pressing the
button $ , and the time it is due to finish may be
displayed by pressing the button % .
Once cooking is completed, the timer will ring; to turn it
off, simply press any button except the ) and * buttons.
Immediate start for a specified period
By programming just the duration (points 1 and 2 of the
“Delayed cooking time for specified period” section), cooking
will begin immediately.
To cancel a cooking schedule already programmed
Press the $ button, release, and use the button to reset
the time to
,
then press the manual cooking mode button (.
Timer Feature
The timer feature allows you to enter a specific amount of
time and begins to count down. This feature does not turn
the oven on or off; it merely sounds when the time has
elapsed.
If the H button is pressed and released the following appears:
,
Then use the * and buttons to set the desired time.
As soon as the setting process is complete, the timer will
start to count down and the current time will appear on the
display.
.
After the time has expired, an audible signal will be emitted,
which can be turned off by pressing any button (except the
* and buttons). At this point the symbol H will also turn
off.
Correction/Cancellation of data
• The data entered can be changed at any time by pressing
the corresponding button and the * or buttons.
• When the data for the cooking duration is cancelled, the
data for the time cooking is due to end is also cancelled
automatically, and vice versa.
• If the oven has already been programmed, it will not
accept times for the end of cooking which are before the
start of the programmed cooking process.