7gb installation – Hotpoint HX901X User Manual
Page 7
7
GB
INSTALLATION
Electrical Connection
• The hood is intended for a fixed permanent
installation. For the mains voltage and frequency
information, consult the rating plate situated
inside the hood. The power supply cable (type
H05VV-F 3x0.75mm
2
) connected to the hoods
terminals marked ‘L’ (mains), ‘N’ (neutral) and
fastened by means of the cable clamp. It must
be connected to a suitable and accessible fixed
power point by qualified personnel following
all laws in force, providing for an omnipolar
switch above the electrical connection with a
minimum contact opening of 3mm.
• The manufacturer declines all responsibility for
injury or damage resulting from incorrect
installation and use.