Hotpoint BE82 - Manual (Page 15)

Using Your Hob
15
NOTE: The timer starts counting down immediately. An audio signal sounds at the end of the
cooking time and the heating zone switches off. Press the key to switch off the
power to the hob.
NOTE: The indicator light that corresponds to the heating zone being programmed flashes
slowly and then remains lit once the programming operation is confirmed. The
indicator light that corresponds to the previously programmed heating zone flashes.
3
A heating zone is already programmed, the corresponding
indicator light is on and the timer display is activated. It
starts flashing slowly as soon as you start to programme
another heating zone.
To display the remaining time programmed for a heating
zone, select it by pressing the relevant heating zone
selection key, its indicator light will remain on while the
other one flashes.
Press the key again to confirm the programming
operation.
Select the second heating zone, then press the key to
access the programming function. Press the key to
display the required duration.
25
5 3
Multiple programming:
2
45
1
25
It is possible to programme all four heating zones at the same time. Follow the
previous step by step procedure to programme the first heating zone, then proceed as
follows: