Hitachi 55HDT79 42HDX99 - Manual (Page 28)

The Remote Contr
ol
ቨ DAY/NIGHT button
Press this button to toggle between Day(Normal),
Day(Dynamic) and Night picture mode settings.
Select Day modes for day time viewing with more
brightness and contrast to compete with room light.
Select Night for nighttime viewing with less brightness
and contrast for amore detailed picture (see page 47
for settings changes).
NOTE: For automatic DAY/NIGHT picture mode
settings, see page
65.
ቩ PICTURE-IN-PICTURE button
See separate section on pages 33-34 for a
description.
ቪ MENU button
The MENU button will start the On-Screen Display.
ቫ INFO button
Press this button when you want to check the
channel being received, the picture source, if the
channel has stereo (ST) or second audio program
(SAP), the time, CHANNEL ID and if the TIMER is
set.
NOTE: 1. The Sleep Timer info will show
momentarily after releasing INFO button.
2. The Aspect setting will not be shown if
the channel is locked.
INPUT 2 Select to choose INPUT 2.
INPUT 3 Select to choose INPUT 3.
INPUT 4 Select to choose INPUT 4.
INPUT 5 Select to choose INPUT 5.
CABLE Select between Cable or Air signal. AIR /
PHOTO INPUT Select to access your pictures from a
digital camera, USB memory or
memory card USB drive connected to
the Photo Input in the side panel of
the Plasma TV (see pages 29-30).
IEEE1394 Select to choose the IEEE1394 Input
only for HDX models (see page 31).
How to Use the Remote to Control Your TV
Photo Input
IEEE 1394
Cable Air /
Input 1
Move SEL Sel.
Input 2
INFO
S-IN: 1
480i 3:17PM
Auto
DIGITAL CHANNELS
Digital Closed Caption
This icon will appear only when
receiving a Digital Broadcast with
Closed Captioning.
INFO
Show Name Air 8
3:00PM- 3:30PM KXYZ-HD
ST TV-G 480i 3:17PM
Auto STEREO
Program Run Time
Program Information
Broadcast
Rating
Picture Format Audio
Broadcast
Main Picture Source
and channel indication
Broadcast channel
identification
Clock
Closed
Caption setting
Audio Source
Selection
ANALOG CHANNELS
INFO
Show Name Air 15-1
3:00PM- 3:30PM KPBS-HD
ST 1080i 3:17PM
Auto
Program Run Time
Program Information
Broadcast
Rating
Picture Format Audio
Broadcast
Main Picture Source
and channel indication
Broadcast channel
identification
Clock
Closed
Caption setting
TV-G DTvCC
ALT U.S.
Alternate
Rating
Program Desctiption
(Press INFO again for a more detailed description)
ቭ EXIT button
This button will exit all On-Screen Displays.
ቮ CURSOR PAD/SELECT button
All the On-Screen Display features can be set or
adjusted by using the CURSOR PAD, except for
numeric entries. The CURSOR PAD will highlight
functions or adjust and set different features. Press
the CURSOR PAD toward desired direction and
press the SELECT button to select.
ቯ GUIDE button
Press this button to access the TV Guide On
Screen
TM interactive display (see page 5 3 ). Press
this button to access the Channel Guide of the
(CBL), and (SAT/STB) while in (CBL)(SAT/STB)
mode.
ተ INPUTS button
When the remote control is in TV mode, press this
button to access the INPUTS menu. Use the
CURSOR PAD and SELECT button to select the
inputs that are being used. Pressing the INPUTS
button repeatedly will also cycle through the Inputs
menu items. Then press the SELECT button to
select.
INPUT 1 Select to choose INPUT 1.
When a Component Video: Y-PbPr
Input is connected to INPUT 3
Input Signal
Format
INFO
Y-PBPR : 3
480i 3:17PM
Auto
When an S-VIDEO Input is connected
to INPUT 1
28