Hitachi VT-FX6500A - Manual (Page 43)

43
REMOTE CONTROL OF THE TV
PROGRAMMING THE REMOTE CONTROL OF THE TV
1 Turn on the TV
Turn on the TV (any channel is okay).
2 Program the remote control
Aim the VCR's remote control at your TV set. Hold down the TV button (not the VCR/TV button) while you press the
number corresponding to your brand of television as shown in the chart.
For example;
If you have an RCA television, press the TV and 0 at the same time. If this button combination sends a signal that
matches with your TV, the channel will change on the TV, and you'll know the remote is set to control the television.
NOTES:
• If that button combination does not change the TV channel, go through the whole list of button combinations one by
one until you find one that does change your TV channel.
• Also, if your brand of TV is not listed in the chart, try all the number buttons. One of them may work for you.
• If the TV channel still doesn't change after going through all the button combinations listed, it is likely that you will
not be able to program this remote control for your TV.
TV Brands Press the TV and This Number
Hitachi 1
Zenith 2
Sony 3
Magnavox 4
Sanyo 5
Gold Star 6
Toshiba 7
Funai 8
Panasonic 2 9
RCA 0
Panasonic 1 CH ( up arrow)
Mitsubishi CH (
down arrow)
JVC +100/ENTER
Sharp 1 MEMORY
Sharp 2 DISPLAY
CONTROLLING THE TV
Once programmed, the VCR's remote control is ready to control the TV.
NOTE:
Be aware that not all of your TV's functions may work even though the remote control is correctly
programmed.
1. Select the TV function mode
First press the TV button to change to the TV function mode, then press the button of the TV function that
you want.
For example;
Press the TV button and the CH (
), and the TV station will change to the next higher station.
NOTE:
Also, you may change the channels at the TV by using the number buttons. If you can not change the
channels at the TV by using the number buttons, press the ENTER button after you press the number
buttons. It may change channels at the TV.
2 Return to the VCR function mode
Press the VCR button to operate your VCR with the remote again.