How to use the remote to control your lcd rear ptv, The remote control – Hitachi 60VX500 User Manual
Page 28
28
HOW TO USE THE REMOTE TO
CONTROL YOUR LCD REAR PTV
1/10
2/10
3/10
4/10
8/10
7/10
6/10
5/10
9/10
10/10
1/10
2/10
3/10
4/10
8/10
7/10
6/10
5/10
9/10
10/10
1/10
2/10
3/10
4/10
8/10
7/10
6/10
5/10
9/10
10/10
Jump
Slideshow
Rotate
THUMB
STICK
SELECT
Slideshow
Jump
Slideshow
Rotate
5 sec
Start
Interval
THUMB
STICK
SELECT
5 seconds
1/10
2/10
5 seconds.. etc.
Jump
Slideshow
Rotate
THUMB
STICK
SELECT
Rotate
1/10
1/10
1/10
THUMB
STICK
THUMB
STICK
SLIDESHOW
Select this menu item to start a slideshow of the Photos in the memory card. Time interval selections can be set from 5, 10 and
30 seconds.
ROTATE
Select this menu item to rotate selected photos either clockwise (THUMBSTICK
̈
) and counterclockwise (THUMBSTICK
̇
).
Use THUMBSTICK
̆
,
̄
to highlight Slideshow item.
While interval is highlighted, press SELECT to change interval time from 5, 10 and 30 seconds. Each press will change interval
time from the three mentioned choices.
Press SELECT to stop on a chosen picture of the slideshow. After 30 seconds, the slideshow will resume or press SELECT again
to continue the slideshow.
Press EXIT to exit the slideshow.
NOTES:
1.
Photo file names modified on a computer should be 8 characters (Ex. ABCD1234.jpg). 1st character: letters;
2nd to 4th: letters or numbers; 5th to 8th: numbers. Photo files should be first placed on a sub directory name
with 8 characters (Ex. 123ABCDE). 1st to 3rd: number; 4th to 8th: letters. The sub directory then should be placed
on a main directory with a “dcim” file name format.
2.
Supported image types are from VGA (640 x 480) up to UXGA (1600 x 1200); JPEG format should conform with
DCF Standard (Design rule for Camera File System).
3.
This TV set displays only digital pictures from digital cameras which meet DCF Standard. Pictures that were copied,
edited or modified on a computer may not be displayed on the TV set.
THE REMOTE CONTROL