haier FCD-360 - Manual (Page 6)

Parts And Features
1. Temperature Control Adjustment
2. Power-On Indicator (green light)
3. Vinyl Coated Wire Basket
4. Interior Drain Plug (see insert)
5. Exterior Drain Plug
6. Lock and Key
8. Castor
7.Handle
2
3
7 6
Vary per model
1
8
5
4
4
• Defrost whenever the frost becomes 1/4" thick. Never use a sharp or
metallic instrument to remove the frost as it may damage the cooling
coils. (A punctured coil will void the warranty)
For draining, place a tray beneath the outer drain plug. Pull out the
drain dial (see fig. #2a) and rotate it so that the arrow points down
ward. This will let the water flow out into the tray.
• Remove the drain plug from the inside of the freezer (see fig. #2b).
Defrosting usually takes a few hours. To defrost faster keep the
freezer door open. When done, push the drain dial in and turn the
arrow to the up position. Re-plug the drain plug inside the freezer
compartment.Note: monitor the container under the drain to avoid
overflow.
• Wipe the interior of the freezer and replace the electrical plug in
the electrical outlet.
• Reset the temperature control to the desired setting.
fig. # 2a fig. # 2b
Defrosting and Draining The Freezer
Lock and Key
• Your freezer has a lock and key feature to secure the freezer.
Close the lid and turn key to lock.Turn key in direction to unlock.
•
9