haier HLC26 - Manual (Page 13)

VGA HDMI2 ANT IN HDMI1
VGA/DVI
AUDIO IN
OPTICAL
How to connect
1 . To get the best picture quality, adjust the VGA graphics card to 1024
2 . Use the TV`s VGA or DVI (Digital Visual Interface)Audio IN port for video connections, depending on your VGA connector.
If the graphic card on the VGA does not output analog and digital RGB simultaneously, connect only one of eitherVGA r DVI IN
to display the VGA on the TV.
If the graphic card on the VGA does output analog and digital RGB simultaneously, set the TV to eithe DVI; (the other mode
is set to Plug and Play automatically by the TV.)
3 . Then, make the corresponding audio connection. If using a sound card, adjust the VGA sound as required.
How to use
1
. Turn on the VGA and the TV.
2. Turn on the display by pressing the POWER button on the TV's remote control.
3 . Use INPUT on the remote control to select VGA or HDMI source.
4 . Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in VGA
mode. If noise is present, change the VGA mode to another resolution, change the refresh rate to another rate or adjust the brightness
and contrast on the menu until the picture is clear. If the refresh rate of the VGA graphic card can not be changed, change the VGA
graphic card or consult the manufacturer of the VGA graphic card.
NOTES:
1 Use a DVI cable.
2 Avoid keeping a fixed image on the TV's screen for a long period of time. The fixed image may become permanently imprinted on the
screen.
3 The synchronization input form for Horizontal and Vertical frequencies is separate.
x768 .
IN o
r VGA or
VGA connection
Resolution
Frame
frequency
(Hz)
VGA
SVGA
XGA
640*480 60Hz
800*600 60Hz/75Hz
1024*768
60Hz
Mode Resolution
External Equipment Connections
Installation
75Hz
Owner s Manual 13