Hampton Direct H200 - Manual (Page 21)

Hampton H200 Cast Freestanding Woodstove 21
1) Remove the andirons and bricks from within the fi rebox.
Andiron
2) Remove bottom tray by undoing the 4 bolts.
Bricks
3) Remove the ash dump cover plates (one inside the fi rebox and one
on the underside of the fi rebox) by removing the 2 nuts and bolts
holding the 2 plates together from underneath the stove.
4) Re-install bottom tray and then install the 2 ash drawer rails to the
bottom tray using 4 bolts.
5) Slide the ash drawer on top of the rails making sure the cover is in
the open position.
Ash Drawer
in open
position.
Ash Plug
OPTIONAL ASH DRAWER KIT INSTALLATION
6) Push the ash plug into the hole inside the fi rebox and re-install the
bricks and andirons.
NOTE: This option is only available with use of standard legs.
INSTALLATION