Engine oil, Fuel, Before using your lawn mower – HONDA HRC216PDA User Manual
Page 5: Please register your lawn mower, Control locations

5
16.Insert the recoil rope
through the rope guides.
Engine Oil
The mower is shipped WITHOUT 
OIL in the engine.
All Honda engines are run at the 
factory prior to packaging. Most of 
the oil is removed prior to 
shipment; however, some oil 
remains in the engine. The 
amount of oil left in the engine 
varies.
Add enough SAE 10W-30 API 
service category SJ or later oil (or 
equivalent) to bring the oil level 
between the upper and lower limit 
marks on the dipstick as shown.
Do not overfill the engine with 
oil. If the engine is overfilled, the 
excess oil may get transferred to 
the air cleaner housing and air 
filter.
After filling the engine with oil, 
remove the hang tag near the 
recoil starter grip that says “The 
engine has no oil.”
Fuel
Before Using Your Lawn Mower
Before using the lawn mower, all mower operators must read the 
following sections:
• LAWN MOWER SAFETY (page 2)
• CONTROL LOCATIONS (page 5)
• BEFORE OPERATION (page 6)
• OPERATION (page 7)
• MAINTENANCE SCHEDULE (page 9)
You can also find additional information on the Honda Power 
Equipment web site. Visit www.hondapowerequipment.com/faq.htm
Please Register Your Lawn Mower
If your dealer did not collect registration information from you, please 
take a few minutes and register your purchase with Honda. This 
allows us to contact you with any important updates regarding your 
mower. Please note registration is not required to obtain warranty 
service.
You can register by completing and mailing the included registration 
card, or go online to www.hondapowerequipment.com and click on 
Product Registration.
CONTROL LOCATIONS
ROPE 
GUIDES
FILLER CAP/DIPSTICK
(do not screw in dipstick 
when checking oil level)
LOWER 
LIMIT
UPPER 
LIMIT
HANDLEBAR
FUEL TANK 
CAP (P. 14)
FRONT CUTTING 
HEIGHT ADJUSTMENT 
LEVERS (P. 7)
MUFFLER
OIL FILLER 
CAP (P. 11)
REAR CUTTING HEIGHT 
ADJUSTMENT LEVER (2) (P. 7)
GRASS BAG
RECOIL
STARTER
CARBURETOR
SPARK PLUG 
CAP (P. 12)
BLADE CONTROL
LEVER (P. 8)
