Harbor Freight Tools 91924 - Manual (Page 4)

SKU 91924 Page 4 For technical questions, please call 1-800-444-3353.
12. Avoid accidental starting. Be sure the Trigger is off before plugging in.
Carrying power tools with your finger on the Trigger, or plugging in power tools
with the Trigger on, invites accidents.
13. Remove adjusting keys or wrenches before turning the power tool on. A
wrench or a key that is left attached to a rotating part of the power tool may result
in personal injury.
14. Do not overreach. Keep proper footing and balance at all times. Proper
footing and balance enables better control of the power tool in unexpected
situations.
15. Use safety equipment. Always wear eye protection. Dust mask, non-skid
safety shoes, hard hat, or hearing protection must be used for appropriate
conditions.
TOOL USE AND CARE
16. Be sure you are standing firmly and in balance before operating this snow
Thrower. Wear proper shoes for what may be a slippery surface. Brace yourself
and grasp the snow Thrower with both hands before operating it.
17. Do not force the tool. Use the correct tool for your application. The correct
tool will do the job better and safer at the rate for which it is designed.
18. Do not use the power tool if the Trigger does not turn it on or off. Any tool
that cannot be controlled with the Trigger is dangerous and must be replaced.
19. Disconnect the Power Cord Plug from the power source before making any
adjustments, changing accessories, or storing the tool. Such preventive
safety measures reduce the risk of starting the tool accidentally.
20. Store idle tools out of reach of children and other untrained persons. Tools
are dangerous in the hands of untrained users.
21. Maintain tools with care. Keep tools clean and in good condition. Properly
maintained tools function better and are easier to control. Do not use a dam
aged tool. Tag damaged tools “Do not use” until repaired.
22. Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the tool’s operation. If damaged, have
the tool serviced before using. Many accidents are caused by poorly main-
tained tools.