Hayter Mowers R48 Recycling Mower 447F - Manual (Page 7)

Installing the Fuse (Model
447F Only)
Your mower comes with a 40-amp fuse that protects the
electric starter.
Important: You cannot start the mower with the
electric starter or charge the battery unless you
install the fuse.
1. Remove the battery cover and the battery and locate
the fuse holder (Figure 7).
Figure 7
1. Screw 3. Fuse holder
2. Battery cover 4. Battery
2. Insert the fuse (from the loose parts bag) into the
fuse holder (Figure 8).
Figure 8
Note: Your mower comes with a fuse in the owner’s
packet and another fuse in the battery box.
3. Install the battery and the battery cover.
Charging the Battery (Model
447F Only)
Refer to Charging the Battery in the Maintenance
section.
7